DSE E400


DSE E400

ENGINE ONLY CONTROLLER ( / MPU)

»  Built-in governor control
»  Automatic speed control
»  Fill, empty, maintain fill and maintain empty
control
»  Manual speed control via push buttons, digital input or analogue input
»  Automatic speed ramping
»  Flexible automatic start control
»  Clutch control
»  LCD text display
»  Multiple display languages
»  Two-key menu navigation
»  Front panel editing with PIN protection
»  Customizable status screens
»  Customizable multi instrumentation screens
»  Under / Over Speed (with MPU only)
»  Low Oil Pressure (Sensor / Switch input)
»  High Coolant (Water) Temperature (Sensor / Switch input)
»  Low Fuel Level (Sensor / Switch input)
»  Emergency Stop
»  Charger Alternator Fail
»  Low / High Battery Voltage
»  Configurable digital inputs (4)
»  Configurable analogue inputs (7)
»  Configurable DC outputs (2)
»  Configurable PWM/PWMi outputs (2)
»  Configurable analogue output (1)
»  Configurable timers and alarms
»  3 configurable maintenance alarms
»  Multiple date and time engine scheduler
»  Configurable display languages
»  Configurable event log (250)
»  Fuel usage monitor and low fuel alarms
»  Charge alternator failure alarm
»  “Protections disabled” feature
»  LCD alarm indication
»  Low power mode
»  USB connectivity
»  Backed-up real time clock
»  CAN engine support
»  CAN, magnetic pick-up or tachometer speed sensing
»  Fully configurable via DSE Configuration Suite PC software
»  Remote SCADA monitoring via DSE Configuration Suite PC software
»  Modbus RTU support by configurable RS485 port


  Dimension Details:
  • Over All Dimension - 189 mm x 125 mm x 54 mm
  • Panel Cut Out Dimension - 148 mm x 112 mm


DSE E400


E400-01 - E400 Engine Controller

E400-02 - E400 Engine Controller (Htr)

Hardware


  Display - 132 x 64 pixel ratio display for clarity

  Frequency Range – 5Hz to 10000Hz

  Pulse Pickup Voltage Range - ±0.5V to 60V RMS Fully Isolated



  DC Supply (Continuous Voltage Rating) – 5V to 35V

  LCD alarm indication

Standards


Test

Reference Standards

ELECTRO-MAGNETIC COMPATIBILITY

  • EMC Generic Immunity Standard for the Industrial Environment
  • EMC Generic Emission Standard for the Industrial Environment

 

  • BS EN 61000-6-2
  • BS EN 61000-6-4

ELECTRICAL SAFETY

  • Safety of Information Technology Equipment, including Electrical Business Equipment

 

  • BS EN 60950

Temperature

  • Ab/Ae Cold Test -30 oC
  • Bb/Be Dry Heat +70 Oc

 

  • BS EN 60068-2-1
  • BS EN 60068-2-2

VIBRATION

  • Ten sweeps in each of three major axes

 

  • BS EN 60068-2-6

HUMIDITY

  • Db Damp Heat Cyclic 20/55 Oc at 95% RH 48 Hours
  • Cab Damp Heat Static 40 oC at 93% RH 48 Hours

 

  • BS EN 60068-2-30
  • BS EN 60068-2-78

SHOCK

  • Three shocks in each of three major axes 15 gn in 11 Ms

 

  • BS EN 60068-2-27

DEGREES OF PROTECTION PROVIDED BY ENCLOSURES

  • IP65 - Front of module when installed into the control panel with the optional sealing gasket

 

  • BS EN 60529