E100


DSE E100

ENGINE ONLY CONTROLLER

»  Real time clock provides accurate event logging
»  Comprehensive warning, controlled shutdown or shutdown protection upon fault condition
»  Extremely efficient power save mode
»  Engine pre-heat
»  Engine run-time scheduler
»  Start on low battery voltage
»  Largest back-lit icon display in its class
»  Fuel and start outputs
»  Engine hours counter
»  Battery voltage monitoring
»  Engine speed protectionUnder / Over Speed (with MPU only)
»  Low Oil Pressure (Sensor / Switch input)
»  High Coolant (Water) Temperature (Sensor / Switch input)
»  Low Fuel Level (Sensor / Switch input)
»  Emergency Stop
»  Charger Alternator Fail
»  Low / High Battery Voltage
»  Configurable remote start input
»  4 configurable DC outputs
»  3 configurable analogue/digital inputs
»  4 configurable digital inputs
»  3 engine maintenance alarms
»  LCD alarm indication
»  Event log (50)
»  Fully configurable via the fascia or PC using USB communication


  Dimension Details:
  • Over All Dimension - 140 mm x 113 mm x 43 mm
  • Panel Cut Out Dimension - 118 mm x 92 mm


Hardware


  Frequency Range – 5Hz to 10000Hz

  Pulse Pickup Voltage Range - ±0.5V to 70V



  DC Supply (Continuous Voltage Rating) – 8V to 35V

  LCD alarm indication

Standards


Test

Reference Standards

ELECTRO-MAGNETIC COMPATIBILITY

  • EMC Generic Immunity Standard for the Industrial Environment
  • EMC Generic Emission Standard for the Industrial Environment

 

  • BS EN 61000-6-2
  • BS EN 61000-6-4

ELECTRICAL SAFETY

  • Safety of Information Technology Equipment, including Electrical Business Equipment

 

  • BS EN 60950

Temperature

  • Ab/Ae Cold Test -30 oC
  • Bb/Be Dry Heat +70 Oc

 

  • BS EN 60068-2-1
  • BS EN 60068-2-2

VIBRATION

  • Ten sweeps in each of three major axes

 

  • BS EN 60068-2-6

HUMIDITY

  • Db Damp Heat Cyclic 20/55 Oc at 95% RH 48 Hours
  • Cab Damp Heat Static 40 oC at 93% RH 48 Hours

 

  • BS EN 60068-2-30
  • BS EN 60068-2-78

SHOCK

  • Three shocks in each of three major axes 15 gn in 11 Ms

 

  • BS EN 60068-2-27

DEGREES OF PROTECTION PROVIDED BY ENCLOSURES

  • IP65 - Front of module when installed into the control panel with the optional sealing gasket

 

  • BS EN 60529